Sales & Support: Request A Quote
Home ProductsMTL Barriers 4500 Series

MTL4544B REPEATER POWER SUPPLY (2-channel, 4/20mA, HART®, 2- or 3-wire transmitters)

MTL4544B REPEATER POWER SUPPLY (2-channel, 4/20mA, HART®, 2- or 3-wire transmitters)

MTL4544B REPEATER POWER SUPPLY (2-channel, 4/20mA, HART®, 2- or 3-wire transmitters)

Product Details:

Place of Origin: UK
Brand Name: MTL
Certification: CE
Model Number: MTL4544B

Payment & Shipping Terms:

Minimum Order Quantity: 10 pcs
Packaging Details: carton
Delivery Time: 4-5 weeks
Payment Terms: T/T payment
Supply Ability: 300 pcs
Contact Now
Detailed Product Description

MTL4544B (MTL4044 replacement) provides fully-floating dc supplies for energising two conventional 2- or 3-wire 4/20mA or HART transmitters located in a hazardous area, and repeats the current in other circuits to drive two safe-area loads. For HART transmitters, the unit allows bi-directional transmission of digital communication signals superimposed on the 4/20mA signal so that the transmitter can be interrogated either from the operator station or by a hand-held communicator.

SPECIFICATION

See also common specification

Number of channels

Two

Location of transmitter

Zone 0, IIC, T4-6, hazardous area if suitably certified

Div 1, Group A, hazardous location

Safe-area output

Signal range: 4 to 20mA

Under/over-range: 0 to 24mA

Safe-area load resistance: 0 to 360Ω @ 24mA

0 to 450Ω @ 20mA

Safe-area circuit output resistance: > 1MΩ

Safe-area circuit ripple

< 50μA peak-to-peak

Hazardous-area input

Signal range: 0 to 24mA (including over-range)

Transmitter voltage: 16.5V at 20mA

Transfer accuracy at 20°C

Better than 20μA

Temperature drift

< 0.8μA/°C

Response time

Settles to within 10% of final value within 50μs

Communications supported

HART® (terminals 1 & 2 and 4 & 5 only)

MTL4544B REPEATER POWER SUPPLY (2-channel, 4/20mA, HART®, 2- or 3-wire transmitters)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: Safe area output referenced to PSU –ve

LED indicator
Green: power indication
Maximum current consumption (with 20mA signals)
96mA at 24V dc
Power dissipation within unit (with 20mA signals)
1.4W at 24V dc
Safety description (each channel)
Terminals 2 to 1 and 3, and 5 to 4 and 6:

Vo=28V Io=93mA Po=651mW Um = 253V rms or dc
Terminals 1 to 3 and 4 to 6:
Simple apparatus ≤1.5V, ≤0.1A and ≤25mW; can be connected
without further certification into any IS loop with an open-circuit
voltage <28V


Functional Safety Management (FSM)

Many MTL products are certified as safe for use in hazardous areas; that is places where explosive material may be present. The products are designed and certified to show that they are incapable of igniting the gas or dust and causing fire or explosion.

Another type of safety is called Functional Safety, which applies when products are used in safety and protection systems, in which a failure may mean that a protective system will not operate as it should. MTL products have been used in safety systems for some time, but there are increasing requirements to demonstrate an adequate level of functional safety, especially after the Buncefield, Texas City and Deepwater Horizon accidents. More and more, customers are demanding that products they use in safety systems meet the requirements of the second edition of the IEC 61508 Functional Safety standard, and they require evidence to show that they do. This is to enable the use of our products within instrumentation loops that are designed to achieve a specific Safety Integrity Level (SIL).

When MTL designs a product in the expectation that it will be used in functional safety-related systems, both the design process and the product needs to comply with IEC 61508:2010.

MTL has chosen to obtain Functional Safety Management (FSM) certification for the company. FSM means that MTL has the necessary processes and competence to design products according to IEC 61508:2010. Certification means that a notified body is ensuring that our processes are correct and that we are working to them. Together, FSM Certification gives our customers confidence in the company and the use of our products for functional safety.


MTL4511 Switch/ Proximity Detector Interface 1-Channel, With Line Fault Detection From UK

 

Contact Details
Real Instrument Ltd.

Contact Person: Mr. Steven

Tel: 86-21-58111208

Fax: 86-21-58111208

Send your inquiry directly to us (0 / 3000)