Sales & Support: Request A Quote
Home ProductsMTL5500 Series Isolators

sell MTL5510 (4-channel, digital input) new and original in stock

sell MTL5510 (4-channel, digital input) new and original in stock

sell MTL5510 (4-channel, digital input) new and original in stock

Product Details:

Place of Origin: England
Brand Name: MTL
Certification: CE
Model Number: MTL5510

Payment & Shipping Terms:

Minimum Order Quantity: 10 pcs
Packaging Details: carton
Delivery Time: in stock
Payment Terms: T/T payment
Supply Ability: 500 pcs
Contact Now
Detailed Product Description

MTL5510 (4-channel, digital input)

controlled  by up to four switches or proximity  detectors  located in terminal and can switch +ve or –ve polarity signals. A range of module configurations  is available (see Table 1) through the use of selector switches. When proximity detector modes are selected, LFD is enabled and the output switches to OFF if a line fault is detected.


See also common specification

number of channels

4, configured by switches

Location of switches

Zone 0, IIC, T6 hazardous area

Div 1, Group A hazardous location

Location of proximity detectors

Zone 0, IIC, T4-6 hazardous area if suitably certified

Div 1, Group A, hazardous location

Hazardous-area inputs

Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR)

Voltage applied to sensor

7 to 9V dc from 1kΩ ±10%

Input/output characteristics

Normal phase

Outputs closed if input > 2.1mA (< 2kΩ in input circuit) Outputs open if input < 1.2mA (> 10kΩ in input circuit)

Hysteresis: 200µA (650Ω) nominal

Line fault detection (LFD) (when selected)

User-selectable via switches on the side of the unit. Open-circuit alarm on if Iin < 50µA

Open-circuit alarm off if Iin > 250µA

Short-circuit alarm on if Rin < 100Ω

Short-circuit alarm off if Rin > 360Ω

Note:  Resistors must be fitted when using the LFD facility with a contact input

500Ω to 1kΩ in series with switch

20kΩ to 25kΩ in parallel with switch

Safe-area outputs

Floating solid-state outputs compatible with logic circuits

Operating frequency: dc to 500Hz

Max. off-state voltage: ± 35V      Max. off-state leakage current: ± 50µA  

Max. on-state resistance: 25Ω     Max. on-state current: ± 50mA

LED indicators

Green: power indication

Yellow: four: on when output active

Red: LFD indication + faulty channel’s yellow LED flashes

Maximum current consumption

40mA at 24V (with all output channels energised)

Power dissipation within unit

0.96W at 24V, with 10mA loads

Safety description (each channel)

Uo=10.5V  Io=14mA  Po=37mW  Um = 253V rms or dc



MTL5546Y Safety Barrier

MTL5546 Safety Barrier

MTL5544S Safety Barrier

MTL5544S Safety Barrier

Contact Details
Real Instrument Ltd.

Contact Person: Mr. Steven

Tel: 86-21-58111208

Fax: 86-21-58111208

Send your inquiry directly to us (0 / 3000)