|Place of Origin:||UK|
|Minimum Order Quantity:||10 pcs|
|Delivery Time:||3-4 weeks|
|Payment Terms:||T/T payment|
|Supply Ability:||500 pcs|
The MTL4500 Series of modules and accessories is designed for use with process connected systems.
It consists of compact isolating interface modules mounted on backplanes, which carry safe-area
signals and power supplies. Hazardous-area circuits connect to the blue terminals on the modules.
Backplanes can be integrated into a user’s process system architecture or mounted in separate
The MTL4544D provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA
transmitter located in a hazardous area, and repeats the current in other circuits to drive two
safe-area loads. For HART 2-wire transmitters, the unit allows bi-directional transmission of digital
communication signals superimposed on the 4/20mA loop current. Seperately powered current
sources, such as 4-wire transmitters, can be connected but will not support HART communication.
Digital Input modules
MTL4501-SR, MTL4504, MTL4510, MTL4510B, MTL4511, MTL4513, MTL4514, MTL4514B, MTL4516,
Digital Output modules
MTL4521, MTL4521L, MTL4523, MTL4523L, MTL4523R, MTL4523V, MTL4523VL, MTL4524,
MTL4524S, MTL4525, MTL4526
Pulse and Vibration modules
MTL4531, MTL4532, MTL4533
Analogue Input modules
MTL4541, MTL4541A, MTL4541AS, MTL4541B, MTL4541P, MTL4541S, MTL4544, MTL4544A,
MTL4544AS, MTL4544B, MTL4544D, MTL4544S
Analogue Output modules
MTL4546, MTL4546C, MTL4546Y, MTL4549, MTL4549C, MTL4549Y
Fire and Smoke Interface modules
Temperature Input modules
MTL4575, MTL4576-RTD, MTL4576-THC, MTL4581
PCS45/PCL45USB configurator for MTL temperature converters
Each module has a multi-pin connector in its base that plugs into a matching connector on the backplane. This connector carries all appropriate safe-area circuits and power supplies. Additional multiway connectors, located at the front of the module, accept the wiring from the hazardous-area circuits. All connectors are keyed so that connections cannot be made the ‘wrong way round’. Status LEDs and configuration ports (where appropriate) are located on the front of the modules for easy access, and full dc isolation is provided between the input and output so that the modules are intrinsically safe without needing an earth.
MTL4500 series standard backplanes, with quick-release clip connectors, accommodate 4, 8, 16 or 24 modules. The backplane carries the safe-area signals and distributes dual-redundant 24V dc power supplies with three-point status monitoring. In applications where a number of 8- and 16-way backplanes are installed, the power supplies can be interconnected. Optional earth-rail kits are available for 8- and 16-way backplanes and tagging-strip kits are available for all backplanes.