Place of Origin: | UK |
Brand Name: | MTL |
Certification: | CE |
Model Number: | MTL5544D |
Minimum Order Quantity: | 20 pcs |
---|---|
Packaging Details: | carton |
Delivery Time: | within 1 week |
Payment Terms: | T/T payment |
Supply Ability: | 300 pcs |
Type: | 1ch 2/3 Wire Transmitter Repeater, Dual Output |
---|
INTRODUCTION
The MTL4544D provides a fully-floating dc supply for energizing a conventional 2- or 3-wire 4/20mA transmitter located in a hazardous area, and repeats the current in other circuits to drive two safe-area loads. For HART 2-wire transmitters, the unit allows bi-directional transmission of digital communication signals superimposed on the 4/20mA loop current. Separately powered current sources, such as 4-wire transmitters, can be connected but will not support HART communication.
SPECIFICATION
number of channels
One
Location of transmitter
Zone 0, IIC, T4–6 hazardous area if suitably certified
Div. 1, Group A hazardous location
Safe-area output
Signal range: 4 to 20mA
Under/over-range: 0 to 24mA
Safe-area load resistance
@ 24mA: 0 to 360Ω
@ 20mA: 0 to 450Ω
Safe-area circuit output resistance: > 1MΩ
Safe-area circuit ripple
< 50µA peak-to-peak
Hazardous-area input
Signal range: 0 to 24mA (including over-range)
Transmitter voltage: 16.5V at 20mA
Transfer accuracy at 20°c
Better than 15µA
Temperature drift
< 0.8µA/°C
response time
Settles to within 10% of final value within 50µs
communications supported
HART (terminals 1 & 2, output Ch 1 only)